• PM-SensorHOT
  • Nox-Sensor
  • Beschleunigungssensor
  • Gierratensensor
    • Sensor zur Erkennung des toten Winkels
    • Abstandssensor des Tempomats
    • Lenkwinkelsensor
  • Online-Katalog

Turbolader – Ausfallsymptome und mögliche Ursachen

Failure Symptoms and Possible Causes

Black smoke

  • Boost pressure control rotary valve/poppet valve does not close
  • Lube air filter system
  • Dirty compressor or charge air cooler
  • Cracked/missing or loose gaskets in the engine air intake
  • Excessive flow resistance in the exhaust system / leakage upstream of the turbine
  • Foreign body damage to the compressor or turbine
  • Fuel system/injection system defective or incorrectly adjusted
  • Insufficient oil supply in the peat loader
  • Suction and pressure pipe distorted or leaking
  • Turbine housing/valve damaged
  • Damage to turbo bearings
  • Valve guide, piston rings, engine or cylinder liners worn/increased knock

Blue smoke

  • Coke and deposits in the center of the turbocharger
  • Crankcase ventilation blocked and distorted
  • Lube air filter system
  • Dirty compressor or charge air cooler
  • Excessive flow resistance in the exhaust system / leakage upstream of the turbine
  • Oil supply and drain pipes clogged, leaking or distorted
  • Piston ring seal defective
  • Damage to turbo bearings
  • Valve guide, piston rings, engine or cylinder liners worn/increased knock

Turbocharger generates acoustic noise

  • Dirty compressor or charge air cooler
  • Cracked/missing or loose gaskets in the engine air intake
  • Excessive flow resistance in the exhaust system / leakage upstream of the turbine
  • Exhaust gas leakage between the turbine exhaust pipe and the exhaust pipe
  • Foreign body damage to the compressor or turbine
  • Insufficient oil supply in the peat loader
  • Suction and pressure pipe distorted or leaking
  • Turbine housing/valve damaged
  • Damage to turbo bearings

Boost pressure is too high

  • Boost pressure control rotary valve/poppet valve does not open
  • Fuel system/injection system defective or incorrectly adjusted
  • Pipe ass vest. rotary valve/poppet valve defective

Defective compressor/turbine wheel

  • Foreign body damage to the compressor or turbine
  • Insufficient oil supply in the peat loader
  • Turbine housing/valve damaged
  • Damage to turbo bearings

Oil leakage at turbine

  • Coke and deposits in the center of the turbocharger
  • Crankcase ventilation blocked and distorted
  • Oil supply and drain pipes clogged, leaking or distorted
  • Piston ring seal defective
  • Damage to turbo bearings
  • Valve guide, piston rings, engine or cylinder liners worn/increased knock

High oil consumption

  • Coke and deposits in the center of the turbocharger
  • Crankcase ventilation blocked and distorted
  • Lube air filter system
  • Dirty compressor or charge air cooler
  • Excessive flow resistance in the exhaust system / leakage upstream of the turbine
  • Oil supply and drain pipes clogged, leaking or distorted
  • Piston ring seal defective
  • Damage to turbo bearings
  • Valve guide, piston rings, engine or cylinder liners worn/increased knock

Insufficient power/boost pressure too low

  • Boost pressure control rotary valve/poppet valve does not close
  • Lube air filter system
  • Dirty compressor or charge air cooler
  • Cracked/missing or loose gaskets in the engine air intake
  • Excessive flow resistance in the exhaust system / leakage upstream of the turbine
  • Foreign body damage to the compressor or turbine
  • Fuel system/injection system defective or incorrectly adjusted
  • Insufficient oil supply in the peat loader
  • Pipe ass vest. rotary valve/poppet valve defective
  • Suction and pressure pipe distorted or leaking
  • Turbine housing/valve damaged
  • Damage to turbo bearings
  • Valve guide, piston rings, engine or cylinder liners worn/increased knock

Oil leakage at compressor

  • Coke and deposits in the center of the turbocharger
  • Crankcase ventilation blocked and distorted
  • Lube air filter system
  • Dirty compressor or charge air cooler
  • Excessive flow resistance in the exhaust system / leakage upstream of the turbine
  • Oil supply and drain pipes clogged, leaking or distorted
  • Piston ring seal defective
  • Damage to turbo bearings
  • Valve guide, piston rings, engine or cylinder liners worn/increased knock

Holen Sie sich umfassenden Support

MOOCAR – als führender Exporteur entwickeln wir kontinuierlich bahnbrechende Sensor- und Aktuatorlösungen zur Optimierung von Emissionskontrolle, Kraftstoffverbrauch und Fahrverhalten. Zusätzlich bieten wir umfassende Daten- und Marktinformationen.

[ninja_form id=2]

Aktie:

Facebook
Twitter
Pinterest
LinkedIn

Finden Sie Ihre Teile

PM-Sensor
NOx-Sensor
Beschleunigungssensor
Gierratensensor

Am beliebtesten

Erhalten Sie die neuesten Updates

Abonnieren Sie unseren wöchentlichen Newsletter

Kein Spam, nur Benachrichtigungen über neue Produkte und Updates.
Auf Taste

Verwandter Rückgriff